Category Archives: Institute activities & news

What are we here for again?

As a baby boomer, I spent a lot of time endlessly thumbing through Popular Mechanics magazines. They were just so damn practical and useful, populated by a world of deeply handy and capable Americans that were hard not to like.

Things are different now. Americans seem to have different things on their mind such as reducng third world countries to dust and misery or ignoring global warming to the point of calamity. They’re not as easy to like.

make coverUntil yesterday when my jaded view of the US took a sudden turn for the better. From my friend Genevieve in Oregon (who is transplanted there under most unusual circumstances) I received a copy ofThe Best of Make: 75 projects from the pages of Make.

Make Magazine is a US Magazine that has only been going for a few years but has found a vast niche market: the people who are the shed tinkerers of the US, the hard rubbish collectors, the try-anything-for-a-bit-of-a-laugh types, the frugal people who never throw anything out because they can see use still in that stuff.

The projects they make a somewhere between art/craft/engineering… and fun. Most important… fun.

At last! We here at the Institute of Backyard Studies salute Make and the many activites they propagate such as Makers Faires and lots of online material (see www.makezine.com)

The book is even better. It starts with a story from Mister Jalopy about trying to repair his car’s non-functional fuel guage which was going to cost over $500. He decided to try to do it himself and ended up finding it was a very simple problem involving a broken clip which would have cost about a dollar.

What the Maker people are about is forcing manufacturers not to do this sort of wasteful foolishness and they pursue with a missionary zeal.

Their Makers Bill of Rights should go up on any respectable shed wall. It includes things like Cases shall be easy to open! Batteries should be replaceable! Special tools are allowed only for darn good reasons! Screws are better than glues! And many others usually relating to eletronics (they are very keen on liberating electronics from geekdom).

There’s also an eagerness and openness about sharing ideas and knowledge that is quite infectious.

This book will gladden the heart of any tinkerer and it is especially good for a child who needs to get some hands-on experience and will see some results from that experience. It would be a nice addition to any library in a community men’s shed..

 

Tinkering

from Mark Thomson, IBYS Advanced Research Director

Coming from an organisation that celebrates tinkering in all its many forms, in the past few weeks we at the Institute have been enjoying the revitalising of tinkering culture. Or rather the public recogntion of the value of tinkering. It’s pleasing because a couple of years ago I had a two week residency at the Haystack Mountain School of Crafts in Maine, during which I wrote a monograph entitled “I tinker therefore I am”. At the time people thought I was some sort of raving loony. Most of them still do of course but I feel a slight smug twinge of satisfaction that I was right.

With the GSU (Global Stuff Up) and all, people are no longer throwing out consumer goods with quite the gay abandon they once did – at least in the wealthy west. The rest of the world has, quite sensibly, always conserved resources and tinkered of course.

Tinkering is a beautiful thing. Or as I said in the Haystack monograph:

Tinkering a minor risktaking activity without any great consequence: it is not goal-directed nor are there defined outcomes. There are no key performance indicators for tinkering. Thus, tinkering is suspended from the pressures of defined goals and time limits. It’s about a question mark, not a product or a saleable process. Tinkering involves a flow state, an intense focus on a small closed world. Tinkering and play are closely interlinked: a ceretain sense of wonder propels the curiousity at the heart of every compulsive tinkerer. Tinkering also allows failure which is essential for any process of evolution.

And so on…

There have have been Wall Street Journal articles:

Tinkering Makes a Comeback Amid Crisis

The ABC (Australian Braodcasting Corporation to you outside Australia) has been busy on tinkering, including this interview with Miles Park from the Faculty of Built Environment at the University of New South Wales who has been exploring the relationship between tinkering, product longevity and e-waste reduction

http://www.abc.net.au/rn/futuretense/stories/2009/2728886.htm

There’s also an interview with me (gosh! self promotion! just fancy that!):

http://www.abc.net.au/rn/futuretense/stories/2009/2741127.htm

There’s also a Tales of Tinkering Blog that the ABC has set up:

http://www.abc.net.au/rn/futuretense/features/tinkering/default.htm

Alex Pang, a bloke from California who works on strategies around future uses of technology, has also written a very nice comprehensive survey of the state of tinkering:

http://askpang.typepad.com/relevant_history/2008/10/reflections-on.html

Nancy White, another West Coast guru (whom I had the great pleasure of meeting recently) has been reflecting usefully on the subject:

http://www.fullcirc.com/wp/2009/03/08/tinkering-and-playing-with-knowledge/

Through Nancy I met (on a stinking hot Saturday morning recently) an Adelaide local Mike Seyfang, who is following up on many of the same themes that we explore in the Institute. A man with a strong science and technology bent, Mike is a veteran of the early days of modern computing in Australia. He’s got an impressive grasp of the possibilities of digital tinkering and knows lots of people of the same ilk. His theories about the future of language could lead to some interesting discussions…

http://mikeseyfang.com/

There are a number of other people who are in on this caper if you are interested: John Seely Brown, Anne Balsamo, Mitch Resnik (more suggestions are welcome)

Or if you want to make some further comments, feel free to add them in the ideas section of our forum.

The chook shed on wheels

It always seemed like an urban myth or a piece of bush leg-pulling: that somewhere out there was an old chook shed being towed behind a van. Then, some months ago, I was going around the roundabout in downtown Alice Springs, just by the council offices and the public library when there it was.

So I threw the old Falcon into a tight squealing u-turn (it was my sister’s boyfriend’s car which I had just borrowed to go down the shops) and went back and had a chat with Frank Turton aka The Chookman.

caravanshed10mono.jpg

Frank is an entertainer and he had just been driving around the Northern Territory doing his stuff. The NT is the kind of place where they appreciate people like Frank. He comes from Paringa which is on the River Murray next to Renmark in South Australia. There’s not a lot to Paringa – a bakery (7/10) and a slightly expensive junk/curio store in the old garage. I suspect that Frank is one of the biggest things Paringa has going for it.

Frank takes his chooks on his musical tours around the great Australian countryside – or at least it was taken for granted that he did. It’s a perfectly natural thing to do. So he needed to tow them behind in their own specialised accomodation.

Frank Turton’s chook shed on wheels

The chooks were definitely in there – they would peek out from the sound holes of the guitars or through some of the ventilator flaps that Frank had thoughtfully provided for his fowls. From the many stickers on the trailer shed it was clear that these were some very well travelled chooks.

Good on ya Frank. Think about it… some people spend their lives pruning the geraniums with nail scissors or getting the the knives and forks in perfect size order from left to right. Not Frank. His mission has been to take his chooks on a national tour and more than once it seems. These are chooks with an expanded view of the world. Just imagine what other cage-locked fowls must think when they meet these sophisticated well-travelled birds. They would be impressed. I was.

Hard rubbish -the garbo’s perspective

Some time back, Malcolm sent me a few shed photos. As you can see below, it’s a modest shed, but clearly loved by its owner.

Malcolm’s shed

Malcolm’s shed pic 3

Malcolm works as a garbological transport engineer for one of the Sydney Councils, which is an excellent position to be in when you want to build a shed.

A good many of the components for the shed (including tools) were sourced on the job, especially during the twice yearly Clean Up day (or ‘hard rubbish’ day as it is known in some parts of Australia. Other parts of the shed were culled from traditional sources: part of the structure was the old roof trusses from a mate’s place that was being renovated;similar with the cladding. The floor was from a garage sale. A bit of money was spent buying new stuff but it was kept to the absolute bare minimum.

This shed is A TRIUMPH OF RESOURCEFULNESS.

The Institute of Backyard Studies pays homage to Malcolm and all who do the right thing and build like this. But wait, there’s more!

It was a privilege and a revelation to speak to someone who works on collecting hard rubbish. He more or less confirmed what I have always suspected – that there is a vested interest in councilsd leaving the stuff out on the street for a while because sooner or later there’s a good chance that a freeloader like me will come along and grab those worn green widgets or that piece of painted, dinged up but so useful Tassie Oak shelf.

And for Malcolm the job involves some hard choices. He said that some days the cabin of the garbage truck is so full of good stuff at the end of the day that the council supervisor has to come and get the rest of the crew in another vehicle because they won’t fit inside. There’s also a lot of transferring stuff going on. He knows that some people he works with a looking for certain things and vice versa, so a lot of swapping can go on at the end of the day. Other things end up being sold on Ebay. Other stuff ends up at the local Vinnies or Salvos if it known that they are looking for good furniture or whatever. As Malcolm says, you make a bit, spread some around, give it away.

img_0006.JPG

Interior Malcolm’s Shed 1

Since these photos were taken Malcolm and his wife have moved home and the current place does not have a shed. As you can imagine, that situation will soon be rectified.

Any more observations about hard rubbish are welcome in our forums. I’ve noticed that hard rubbish seems to be changing – this year there’s heaps of those trolley barbecues, along with the usual canvas and wood fold up chairs, cracked plastic furniture, busted bamboo anti mozzie oil lamps and broken battery powered vacuum cleaners. Many whippersnippers seem to have reached the end of their working lives (although I’ve now got 4 and the motor works on every one of them) There’s even a few satellite tv dishes (they look handy…) I’m always looking for more Random Excuse Generator parts or something that may have been part of Henry Hoke’s Quack of Doom (see elsewhere on this sight for sore eyey about Henry’s inventions)

Hard Rubbish and re-use is a subject worthy of further study. There’s an interesting essay about all this from ‘The Sage on the Page’

http://members.iinet.net.au/~delilah/sage/category.php?category=Essays and look up bindilling and re-use

More to come later

 

The Maker’s Bill of Rights

As a baby boomer, I spent a lot of time endlessly thumbing through Popular Mechanics magazines. They were just so damn practical and useful, populated by a world of deeply handy and capable Americans that were hard not to like.

Things are different now. Americans seem to have different things on their mind such as reducng third world countries to dust and misery or ignoring global warming to the point of calamity. They’re not as easy to like.

make coverUntil yesterday when my jaded view of the US took a sudden turn for the better. From my friend Genevieve in Oregon (who is transplanted there under most unusual circumstances) I received a copy ofThe Best of Make: 75 projects from the pages of Make.

Make Magazine is a US Magazine that has only been going for a few years but has found a vast niche market: the people who are the shed tinkerers of the US, the hard rubbish collectors, the try-anything-for-a-bit-of-a-laugh types, the frugal people who never throw anything out because they can see use still in that stuff.

The projects they make a somewhere between art/craft/engineering… and fun. Most important… fun.

At last! We here at the Institute of Backyard Studies salute Make and the many activites they propagate such as Makers Faires and lots of online material (see www.makezine.com)

The book is even better. It starts with a story from Mister Jalopy about trying to repair his car’s non-functional fuel guage which was going to cost over $500. He decided to try to do it himself and ended up finding it was a very simple problem involving a broken clip which would have cost about a dollar.

What the Maker people are about is forcing manufacturers not to do this sort of wasteful foolishness and they pursue with a missionary zeal.

Their Makers Bill of Rights should go up on any respectable shed wall. It includes things like Cases shall be easy to open! Batteries should be replaceable! Special tools are allowed only for darn good reasons! Screws are better than glues! And many others usually relating to electronics (they are very keen on liberating electronics from geekdom).

There’s also an eagerness and openness about sharing ideas and knowledge that is quite infectious.

This book will gladden the heart of any tinkerer and it is especially good for a child who needs to get some hands-on experience and will see some results from that experience. It would be a nice addition to any library in a community men’s shed..

 

The end of Robby’s or deep handiness takes another blow

Should you be the owner of an ancient Pye radiogram, a Kreisler television or any of the plethora of audio visual appliances once manufactured in this country, then you may well be accustomed to unsuccessfully attempting to have it repaired.

“You can’t get the parts…” the repair guy would say.

Not so fast: you might get the parts – or you could until Robby’s started to close down.

Horace ‘Robby’ Robinson’s shop in Long Street, Queenstown is a vast shambles of electrical components and assorted paraphernalia, its gloomy corridors catalogued with jars of diodes, triodes, transistors, switches, relays, valves, everything.

It is the lurking place of the electrical tinkerers who would never say die to that old radio or record player. They inhabit the half light of Robby’s corridors and byways, searching for elusive buried electrical treasure. These fixers and repairers are an almost secret club of electrical savants who know how all these things work – what a thermal overload relay does or how a three phase rectifier transformer can be fixed. Get them started and they’ll tell you about the glory that was ETSA or how they fixed a discarded Bang and Olufsen television from the hard rubbish with a $2 part (from Robby’s of course). They thrive within a filigree of useful contacts that can repair almost anything that has had a current running through it. Robby’s is – or rather was – one of the vital nodes in that spider web.

But Robby is 89 now and his eyesight is going. The vast stock of the shop, which over the last 50 years has been a car parts business, a hardware store and secondhand furniture shop, is being sold off in a series of sales by his children Lyn and Paul.

Apparently Robby never had any formal training in the electrical and electronic trades but he obviously knew a thing or two about auctions and bargains, picking up the remnants of disappearing industries and enterprises. Equipment from Woomera and the Weapons Research Establishment can still be found amongst the boxes and shelves, some of it made to measure or record some part of that great imperial endeavour that went on secretly in South Australia’s deserts in the 50s and 60s.

At these Saturday morning closing sales, Lyn and Paul guard the entrance and reminisce with the regulars. Bargain hunters and repairers– most of whom seem to know each other – emerge from rummaging through dusty boxes and shelves with odd collections of electrical loot for which they can see a potential use. They leave satisfied but often express a sadness that such a place will no longer exist. In a few weeks time there will be a big final auction and the site will no doubt end up as yet another real estate development.

So does it matter that places like Robby’s vanish? It matters not just because we will have boring sterile suburbs but because it represents another unravelling of the rich and largely hidden social networks in which people find meaning, learn new things, share knowledge. Those networks make our cities livable and while the Internet replicates some of those networks, there is no substitute for the tangible experience and deep handiness that goes with places like Robby’s. We will be the poorer for its passing.

 

Check out the Institute’s Forum

Show and Tell Sheds: the place to post your own shed stories and photos

Resourcefulness: share your thoughts about resilience, resourcefulness and general handiness

Ideas: inventions, thoughts, ideas – float them here!

Any Questions? Got a shed problem? Need some help? Ask your question here and see if anybody has the answer

Shed Buy, Sell and Swap: a good place to look for things you need, or offer things you don’t need any more

Everything else: general chatter

Forum Housekeeping: the rules of engagement, dedicated to keeping the Forum friendly

Start by entering a username and password, and then you’ll be registered as a member of the Forum. You’ll need to use the same login every time you go to the Forum. We look forward to sharing some lively discussions, debates, creative ideas and inventions, as well as seeing your own shed stories and photos. So don’t hold back, start writing. (At the moment we are getting a lot of spam – we’re trying to eliminate it. However we can spot the difference between your genuine contribution and ads for bloody I-phones)

The Random Excuse Generator – firing on all three cylinders.

Henry Hoke’s Random Excuse Generator as it was rediscovered

Dr Chris Block and I recently completed a trial run of the reconstructed Random Excuse Generator – the little known masterwork of mechanical genius Henry Hoke.

It was a great occasion: achieving a sort of closure to many years of hard work by Dr Block (who is the Technical Director here at the Insitute) and I.

A film crew was present to record the final triumphant moments and it is viewable on Youtube at:

http://www.youtube.com/watch?v=F_CvIg_z1rM

We are endeavouring to present the REG at a number of public events in the upcoming year.